This video shows you how I lay down the toolpaths for my guitar. The first few slides show you how I do doublesided CNC machining on my DIY cnc. I use the doweltechnique, with 6mm dowels. Then it takes the [...]
Read moreGuitar Fretboard Generator plugin for Fusion360
While looking for fret generators, I found none which was really straightforward for direct use in Fusion360. So I decided to make this little AddIn/plugin for Fusion360: Fret Generator. You can find it on GitHub(link) It draws a complete scale of the [...]
Read moreAdding frets to a guitarneck in Fusion360
This video shows you how to project the frets onto the fretboard with Fusion360. The fretboard DXF file is made with an online fretboard generator. The file is imported as such in Fusion360. https://youtu.be/6Kj8eS4fpsw UPDATE: I've made this guitar fretboard generator for [...]
Read moreDrawing a guitar in Fusion 360 for CNC milling
I made a video to show you how I draw a guitar in Fusion360. I made it because I could not find a video online which showed me all the basic things you need to get started. Little funfact: This [...]
Read moreMachining the guitar neck on my DIY CNC
This week I had some spare time to finally machine the guitar neck. The neck is drawn in Autodesk Fusion360, in the same file as the guitar body. I will use some multiplex 36mm, this will not be the final [...]
Read moreMachining a guitar on a CNC
This article is about how I've made a guitarbody on my CNC machine. The drawing of the guitar was done in Fusion360. I started with getting the right dimensions for the pickups and tremolo. To be sure this would fit right I made [...]
Read more